Change Settings; Picture; Sound - Philips BDP2182 User Manual

3 Change settings

This section helps you to change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press . To exit the
menu, press .

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV display]: Select a picture display format
•
to fit the TV screen.
• [HDMI video]: Select an HDMI video
resolution.
[HDMI Deep Color]: Display colors with
•
more shades and hues when the video
content is recorded in Deep Color and the
TV supports this feature.
[Picture settings]: Select a predefined
•
color setting.
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
EN
14
Watch 3D video
Note
•
If you change a setting, make sure that the TV supports
the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Night Mode]: Select quiet or full dynamic
•
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
• [HDMI Audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital Audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
[PCM Downsampling]: Set the sampling
•
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.