Sony Vaio VPCL11 Series Operating Instructions - Hardware Manual page 33

Using Your VAIO Computer >
Using the Keyboard
To connect the wireless keyboard
!
To connect the wireless keyboard, it must be located within a range of 30 cm to 1 m from the computer.
1 Make sure the supplied two AA batteries are properly installed.
2 Turn on the computer.
3 Slide the power switch on the back of the keyboard to the ON position.
4 Press the CONNECT button (1) on the bottom of the keyboard.
5 Press the CONNECT button (2) on the back of the computer while the connect indicator light
The rapid-blinking connect indicator light turns off when connection is established between the computer and the
keyboard. If not, repeat the procedure.
!
The connect indicator light
connection is made during this period, the indicator light goes blinking slowly to indicate that the connection is down.
blinks rapidly for about one minute to indicate that the keyboard is ready for connection with the computer. If no
n 33 N
is blinking rapidly.