Sony Vaio VPCL11 Series Operating Instructions - Hardware Manual page 17

Getting Started >
Setting Up Your Computer
Preparing for Wall Mounting
Four mounting studs and six screws, which are compliant with the Video Electronics Standards Association (VESA) mounting
standard, are supplied with your computer for connecting the computer to your mounting system.
!
Before connecting your computer to your mounting system or changing your computer setup from the desktop type to the wall-mount type, make sure
that:
The weight of your computer is within the range of supported weight of your mounting system. See the manual that came with your mounting
system for the weight information.
A wireless connection is established both between the computer and the keyboard and between the computer and the mouse. If not, follow the
instructions described in
You shut down the computer, turn off all peripheral devices, disconnect the power cord and the peripheral devices from the power source, and
then wait about an hour until the computer cools down before proceeding.
While your computer is wall mounted, observe the following so as not to break the frame and cause the main unit to fall from the wall, resulting in
damage to the computer or personal injuries.
Do not place any objects on top of your computer.
Do not place or hang any objects from the bottom chassis frame of your computer.
Keep children from hanging from the bottom chassis frame of your computer.
To connect the wireless keyboard (page 33) and To connect the wireless mouse
n
(page 37).
17 N