Blu-Ray Disc Player; Dvd Player - Philips 40PUS6809 User Manual

To synchronise the sound on the TV . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out offset.
3 - Use the slider bar to set the sound offset and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby
Digital, DTS® or similar, set the Audio out format to
Multichannel. With Multichannel, the TV can send the
compressed multichannel sound signal from a TV channel or
connected player to the Home Theatre System. If you have a
Home Theatre System without multichannel sound processing,
select Stereo.
To set the Audio out format . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out
format.
3 - Select Multichannel or Stereo.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out levelling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
To level the difference in volume . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out
levelling.
3 - If the volume difference is large, select More. If the volume
difference is small, select Less.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted. This noise is heard when the audio
or video file has DTS sound but the Home Theatre System has
no DTS sound processing. You can fix this by setting the Audio
out format of the TV to Stereo.
Press  and select Setup > TV settings > Sound > Advanced >
Audio out format.
No sound
If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
• Check if you connected the HDMI cable to an HDMI ARC
connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
• Check if the HDMI ARC setting on the TV is switched On.
Press  and select Setup > TV settings > Sound > Advanced >
HDMI ARC.
4.7

Blu-ray Disc player

Use a High speed HDMI cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
For more information on EasyLink, press
up EasyLink HDMI CEC.
4.8

DVD player

Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
If the DVD player is connected with HDMI and has EasyLink
CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press
look up EasyLink HDMI CEC.
17
 Keywords and look
 Keywords and