Installing Your Dryer; Basic Requirments - Samsung DV56H9100EV/A2 User Manual

installing your dryer

unpackInG your DryEr
Unpack your dryer and Inspect it for shipping damage. Make sure you have received all of the items
shown below. If your dryer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG (726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only
during servicing.
Warning
Service Personnel - Do not contact the following parts while the appliance is energized: Control board
and inlet valve.
Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,
etc.) well out of children's reach.
Warning
tools needed
pliers
level
parts supplied
"y"- connector

baSIc rEquIrmEntS

Make sure you have everything necessary for proper installation
• A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
• A POWER CORD for electric dryers (except in Canada).
• GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.
• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
DV9100HA-DC68-03170K-14-EN.indd 7
Top Cover
Control panel
Filter
Frame Front
cutting knife
phillips screwdriver
hose water
[ bacK ]
Door
pipe wrench (gas only)
duct tape
short inlet hose
English - 7
Duct Exhaust
nut drivers
Wrench
2019/11/28 14:36:11