Wall-Vented Installation - LG LMV1371TB Installation Instructions Manual

WALL-VENTED INSTALLATION:

1. Remove one motor mounting screw and two mount-all
mounting screws. Take off the mount-all from the|
oven. See Figure 14.
2. Carefully lift the vent motor of the microwave oven.
3. Rotate the vent motor 180° so the exhaust ports
face the back of the cabinet. See Figure 15.
4. Place the motor back into microwave oven.
5. Reattach mount-all to microwave oven. Attach
motor mounting screw and then two mount-all
mount screws. See Figure 14.
STEP 3:
PREPARE THE VENT MOTOR
Use side cutters or tin snips.
– 11 –
Figure 13
Vent motor
Figure 14
motor wire
Figure 15
Knockouts
mount-all
mount-all
mounting screws
motor
mounting screw
exhaust ports