Samsung HG43NF690UFXZA Installation Manual page 30

Hotel TV Function
Category
REACH RF Mode
REACH IP Mode
Server URL Setting
REACH Channel
Group ID
REACH
Solution
REACH Update Time
REACH Update
Immediate
REACH Config Version Displays the TV Configuration Data version received from the REACH Server.
H.Browser Mode
H.Browser
Solution URL Launcher Setting
HMS Mode
HMS Server URL
Setting
HMS Gateway Role
HMS
HMS HalfTicker Display
Virtual Standby Mode
Virtual
Standby
Reboot Time
Room Number Room Number
✎ Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS,
and H.Browser.
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
30
English
Item
You can turn on or off the REACH RF Mode. When set to On, the TV can operate with the REACH
Server (Modulator) through the RF channel (DTV cable).
You can turn on or off the REACH IP Mode. When set to On, the TV can operate with the REACH IP
Server through the IP network.
You can enter the REACH IP Server's address. (Example: http://192.168.1.2:443)
This is a DTV Cable Channel PTC Number for receiving REACH Data when the REACH RF Mode is
on. The value must be same as the value set on the REACH Server (Modulator).
You can set the TV's Group ID to manage TVs in groups on the REACH Server (Modulator).
You can set the specific time to receive and update REACH Data from the REACH Server
(Modulator). (Operates when the AC power cord is plugged in and the power is off.)
y OFF: You can turn off the REACH Update Time function.
y 1hour: 1 hour after the TV's power is off
y 2hours: 2 hours after the TV's power is off
y 12:00 am: 12:00 am
y 2:00 am: 2:00 am everyday
y 12:00 pm: 12:00 pm everyday
y 2:00 pm: 2:00 pm everyday
When set to On, the TV will receive and update REACH Data from the REACH Server (Modulator)
right after the power is off. (Operates when the AC power cord is plugged in and the power is off.)
You can turn on or off the H.Browser Mode and run the H.Browser Web App.
H.Browser Solution settings menu
y Install Web App: Enter the H.Browser Server URL where Web App and sssp_config.xml files are
located.
y Uninstall: You can delete the installed Web App.
y Timeout setting: Set the timeout period for connecting to the URL.
y Developer Mode: If you used Tizen Studio (SDK) for development, you can connect to the Host
PC (which SDK is installed) to use the development tool.
You can turn on or off the HMS Mode. When set to On, the TV can operate with the HMS Server
through the IP network.
You can enter the HMS Server's address. (Example: http://192.168.1.2:8080)
When there is one TV per room, set to 'Master'.
When there are more than one TVs per room, set the main TV to 'Master' and the others to
'Slave'.
Set to On if you want to use the HalfTicker UI.
When set to Off, the HalfTicker UI will not be displayed. However, all the hot keys (except for
Room Control key) on the HMS remote control will work normally without the HalfTicker UI
display.
When the AC power cord is plugged in and the power is off, this option maintains the TV's
important features even after the screen is off.
– Electricity consumption may vary depending on the environment.
After the TV power is off (in Virtual Standby Mode) if there is no input from the user within the
set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
You can set the room number of the TV's location.
Description