Philips 32PFL74 6M Series User Manual page 35

Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to the TV remote control.
Caution: This is an advanced setting. Devices
that do not support this setting will not
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [EasyLink Remote Control] >
[On] or [Off].
4. Press OK to activate.
Notes:

To switch back to TV control, press ,
then select [Watch TV].

To control another device, press ,
then select the device from the Home
menu.

To exit, press EXIT.
EasyLink buttons
Control HDMI-CEC compliant devices with
the following buttons on the TV remote
control.

OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.

(Previous) /
backwards and forwards on the
connected device.

Numeric buttons: Select a title, chapter
or track.

Play buttons: Control video or music
play.

Standby: Display the menu of the
connected device.

: Display the TV menu.

(Standby): Switch the TV and the
connected device to standby.
Other EasyLink buttons are available through
the On-Screen Remote Control (OSRC).
(Next): Search
To access the OSRC
1. While you view content from a connected
device, press OPTIONS.
2. Select [Show device keys], then press
OK.
3. Select an onscreen button, then press OK.
4. Press EXIT to exit.
Select speaker output
If the connected device is HDMI Audio
Return Channel (HDMI ARC) compliant,
you can output TV audio through an HDMI
cable. An additional audio cable is not
required. Make sure you connect the device
to the HDMI ARC connector on the TV.
See Connect your TV > About cables >
HDMI (Page 45).
Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select one of the following options, then
press OK:

[Off]: Switch off TV speakers.

[On]: Switch on TV speakers.

[EasyLink]: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
adjust menu.

[EasyLink autostart]: Turn off TV
speakers automatically and stream TV
audio to the connected HDMI-CEC
audio device.
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch
the TV audio.
1. While you watch TV, press
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:
ADJUST.
EN 35