Everex Impact GD3300 User Manual page 3

Copyright
Copyright © 2007 Everex Systems Inc. All rights reserved.
♦
Disclaimer: Everex Systems Inc
editorial errors or omissions contained herein; or for incidental or
consequential damages resulting from furnishing this material, or the
performance or use of this product.
♦
Everex Systems Inc. reserves the right to change product specification
without prior notice; therefore, information in this document may change
without notice.
♦
No part of this document may be copied, reproduced, or transmitted by
any means or for any purpose without prior written permission from FIC
Incorporated.
Liability
INFORMATION WITHIN THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OF
NONINFRINGEMENT. Information, data and specifications may contain
technical inaccuracies or typographical errors and may be changed or updated
without notice. Everex may also improve and/or change products and/or
programs described in this information at any time, without notice.
Disclaimer
Published materials may contain inaccuracies and typographical errors. Everex
does not warrant the accuracy or completeness of the materials or the reliability
of any advice, opinion, statement or other information displayed or distributed
through Everex. Reliance on any such opinion, advice, statement,
memorandum, or information shall be at the sole discretion of the user. Everex
reserves the right to correct any errors or omissions in any portion of these
materials at any time without notice. The information and materials presented
and the references made available, are provided "As Is" without any
representation or warranty, express or implied, of any kind, including, but not
limited to, warranties of merchantability, non infringement, or fitness for any
particular purpose, some jurisdictions do not allow for the exclusion of implied
warranties, so the above exclusions may not apply.
COPYRIGHT & SAFETY STATEMENT
.
shall not be liable for technical or
III