Table of Contents
Advertisement
• Region Settings OSD
‒ Initially highlighted: EU
‒ If you press the right directional button after selecting Change, you can change the country.
‒ If the country is changed, the TV automatically turns off and on.
‒ If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu.
‒ Before select country, refer to the country list information on the right.
• Welcome to Samsung TV! OSD
‒ Initially highlighted: Welcome (English)
‒ If you press the right directional button, the "TV Installation Type" OSD appears
• TV Installation Type OSD
‒ Initially highlighted: TV Basic Setup
‒ If you press the right directional button, the "Configure your TV" OSD appears
• Configure your TV OSD
‒ Initially highlighted: Others
‒ Select your Country and Picture Mode.
‒ The country information for the TV settings may differ from the country list information in "Region Settings
OSD".
• Terr./Cable Signal Detected OSD
‒ Then select the connected aerial that you want to use to get channels.
‒ After Channel sanning is completed, select Next.
‒ When the RF cable is not connected, the screen is skipped.
• Set Clock Mode, DST (Daylight saving time), and Time Zone OSD
‒ Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern
‒ If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and time automatically.
‒ If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and
time on the TV manually.
‒ Set DST On or Off to apply or not apply daylight saving time to the TV.
‒ Select your time zone on the map that appears.
42
English
Advertisement
Table of Contents
