GPX DVR 9511 C Manual page 27

RC359H-P.BAUTSSK_ENG_0701 2008.7.1
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc (or tape) loaded.
– A non-recordable disc (or tape) is loaded.
– [Disc Protect] option is set to [ON] in the Setup menu (see page 19).
– The unit is in operating (recording, deleting etc.).
– There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R,
DVD+RW) recorded on the disc.
You cannot enter a timer program when:
– A recording is already underway.
– The time you're trying to set has already passed.
– There are already 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Timer recording with S V ®
HOW IEW
A S V code is a series of numbers which you can use to automatically
HOW IEW
program your unit to record a certain program. Most TV guides publish
S V programming numbers with their program details.
HOW IEW
Press S V button.
HOW IEW
The ShowView menu will appear. Press S
Enter the S V programming number using numerical buttons then press
HOW IEW
ENTER to shows the [Timer Record] menu. You can change the settings on the
[Timer Record] menu as required.
The "Rec OK" on the [Check] field on the [Timer Record List] menu indicates
the timer recording is programmed correctly.
ShowView is a registered trademarks of Gemstar Development Corporation.
The S V System is manufactured under license from Gemstar
HOW IEW
Development Corporation.
4:52 PM Page 27
code
V again to exit the menu.
HOW IEW
Recording From an external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder's external inputs.
Each press of the AV/INPUT changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the unit before recording an external source.
Tuner: Built-in tuner
AV1: AV1 scart jack mounted on back panel
AV2: AV2 DECODER scart jack mounted on back panel
AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
Playing while you are recording
RAM
You can start play from the beginning of the title while continuing to record it.
While recording (in DVD mode). Play cannot be started until at least 30 seconds
after recording starts. This function does not work in VCR Recording mode.
Press N (PLAY).
Start play of the title you are recording.
Press STOP (x) to return to the current recording screen.
OR
Press TIMESHIFT.
The PIP(Picture-In-Picture) window appears on the screen as shown below. What is
currently being recorded appears as a PIP and you will hear the playback audio.
Press STOP (x) to return to the current recording screen.
27