Advertisement
4 start manual recording
4a
4b
4c
Record
Mode
1 Hour Mode
2 Hour Mode
4 Hour Mode
6 Hour Mode
4d
4e
xrv665_qsg_eng_17312.indd 2
xrv665_qsg_eng_17312.indd 2
Insert a recordable
DVD+R/+RWwith the label
facing up.
To record TV programme,
press REC SOURCE to
select { Tuner }.
To record from an additional
device connected to this
DVD Recorder, press REC
SOURCE repeatedly to
select the corresponding
external input channel :
{ Front CVBS } { Front
S-Video }, { DV }, { EXT 2 }.
Press REC MODE to select
a desired recording mode.
It defi nes the picture quality
and the maximum recording
time for a disc.
Maximum Recording
Picture Quality
Time per Disc
High quality
1 hour
DVD quality-Standard Play
2 hours
VHS quality-Extended Play
4 hours
VHS quality-Super Long Play
6 hours
â
Press RECORD
to start
recording.
To pause the recording,
press Å. To resume record
ing, press RECORD â.
To stop the recording, press
STOPÇ.
Wait until the message
disappears from the display
panel before you remove
the disc.
NEED HELP? Read the accompanying User Manual.
5 start playback
To playback a disc
5a
5b
5c
To watch the TV
programmes
5d
GET PICTURE
•
Check the AV mode on TV. It may be called FRONT, A/V IN,
or VIDEO. Choose the different modes using TV remote
control.
•
Or, use the TV remote control to select Channel 1 on TV, then
press Channel down button until you get the picture.
•
See your TV manual for more details.
GET SOUND
•
Use the supplied scart cable to connect the DVD recorder to
your TV, the picture and sound will output through the TV.
•
Or, connect the AUDIO L/R (red/white) sockets at the back
of the DVD recorder to the corresponding AUDIO input
sockets on a TV, stereo system or receiver. Turn on the
connected system and select the appropriate channel.
Insert a disc with the label
side facing up.
2
ALL
SUPER VIDEO
Playback may start
automatically.
If not, press PLAY
.
If a disc menu appears,
use
keys to navigate
within the menu, highlight a
title and press OK to start
playback.
To stop playback, press
STOPÇ.
Press
to
REC SOURCE
select { Tuner }, then use
keys to select the
programme number.
2005-12-20 5:29:06 PM
2005-12-20 5:29:06 PM
Advertisement
