Related Manuals for Philips 58PFT5309
Summary of Contents for Philips 58PFT5309
- Page 1 Register your product and get support at www.philips.com/welcome 58PFT5309 User manual...
-
Page 3: Table Of Contents
Contents 7 TV connections Rear connections Side connections Connecting to a computer Use Philips EasyLink 1 Caution 8 Product information 2 Important Display resolutions Safety Multimedia Sound power Inherent resolution 3 Your TV Tuner / Reception / Transmission Control Panel... -
Page 4: Caution
If the fuse is lost, contact your dealer Errors reported to Philips will be adapted and in order to verify the correct type. published on the Philips support website as Refit the fuse cover. -
Page 5: Important
TV and wall mount. TP Vision Europe into the TV, disconnect the TV from the B.V. bears no responsibility for improper power outlet immediately. Contact Philips wall mounting that results in accident, Consumer Care to have the TV checked injury or damage. - Page 6 Risk of swallowing batteries! • Risk of damage to the TV screen! Never • The product/remote control may contain a touch, push, rub or strike the screen with coin-type battery, which can be swallowed. any object. Keep the battery out of reach of children To avoid deformations and color fading, •...
-
Page 7: Your Tv
3 Your TV Remote Control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. Control Panel a Volume-: Without the key menu, the volume-down function is available. -
Page 8: Remote Control Usage
Remote control usage (Home) Access or exit from the main menu and return to the previous menu. When you use the remote control, hold it close to the TV and point it at the remote control INFO sensor. Make sure that the line-of-sight between Display information about current activity. -
Page 9: Use Your Tv
4 Use your TV Switch channels This section helps you perform basic TV operations. Switch TV on or off Standby indicator Press CH +/- on the remote control or • the lower right part of the TV. • Enter a channel number using the numeric buttons on the remote control. -
Page 10: Watch Connected Devices
Press to switch to and resume the last watched channel. Watch connected devices Note To increase or decrease volume • Switch on the device before selecting it as an external Press VOL +/-at the lower right part of • signal source. the TV or the Volume Control+/- on the remote control. -
Page 11: Other Uses Of The Tv
5 Other uses of Change the picture and sound setup the TV Change the picture and sound setup to suit your preferences. You can either use the presets or manually change the setup. Accessing the TV menu Adjusting the picture setup Press ADJUST and select [Picture]. -
Page 12: Adjusting Setup
• [Cool]: Bluish white tint. [Personal]: Provides user • • [Normal]: White tint. Users can customization functions in order personalize the white tint inPCmode. to optimize all sound effect • [Warm]: Reddish white tint. parameters and achieve the best [Advanced control]: experience. - Page 13 • [Sleep Timer]: Sets the duration the Summary of picture formats TV remains idle before it automatically enters standby mode. Adjust Configuration of the picture setup listed below. the time with the sleep button on the remote control. Options: Notes Off/10/20/30/60/90/120/180 minutes.
-
Page 14: Use Timer
Use timer Enter the password and select [Channel Lock]. Choose a channel. Press OK to lock or You can set the timer to switch the TV to standby unlock the channel. mode at a set time. Repeat this step to lock or unlock multiple channels. • [Channel Lock]: When channels are • locked: Before using the timer, please set the sleep timer. •... -
Page 15: Playing Media From Usb Devices
• [V.Position]: Adjusts the vertical Viewing photos and playing audio and position. video files • [Phase]: Adjusts the phase frequency of the VGA signal. Turn on the TV. • [Clock]: Adjusts the clock frequency of Connect the USB storage device to the the VGA signal. - Page 16 Changing slide show playback setup Watching video When you want to start playing a slide show, press In the USB browser, select [Movie], then (Home) and select one of the following options, press OK. then press OK. Press OK to play the video. [Pause/Play]: Start or stop playback •...
-
Page 17: Updating The Tv Software
Wait for approximately five minutes before removing the USB storage device. Updating the TV software Philips constantly strives to improve its products, so we recommend that you update your TV software whenever an update becomes available. Please visit the website at www.philips.com/support to find out whether... -
Page 18: Setting Up Channels
6 Setting up Select [Start frequency (MHz) / End Frequency (MHz)] and use the number channels keys to enter the three-digit channel frequencies. Select [Start Search] and press OK. (Home) Exit. Press This chapter explains how to reconfigure and fine-tune channels. Skipping channels Setting up channels Press ADJUST. -
Page 19: Renaming Channels
Renaming channels You can rename channels. Selecting a channel will display its name. Press ADJUST. Press Select [TV] > [Channels] > [Channel Edit]. » The [Channel Edit] menu will be displayed. Press Select the channel you wish to rename, then press the OK button. Press Select the channel name, then press the OK button to enter the editing interface. -
Page 20: Tv Connections
7 TV connections b AV input This chapter explains how to connect devices with different interfaces. Video Note • You can use different connection types to connect devices to the TV. Rear connections a Component signal input Audio and video input from DVD players, game consoles and other analog or digital Y / AV devices... -
Page 21: Side Connections
d PC inputs (VGA and audio) • The TV speakers will automatically be muted when headphones are plugged in. b HDMI 1/HDMI 2/ HDMI 3 Digital audio and video input from Blu-ray players and other high definition devices AUDIO e SPDIF Transmit sound to digital audio signal, then connected audio device can play digital audio sound. -
Page 22: Connecting To A Computer
Connecting to a computer AUDIO Before connecting the computer to the TV: Set the computer screen refresh rate to 60Hz. • Select a supported resolution on the • computer. Connect to the computer using one of the following connections: Notes •... -
Page 23: Use Philips Easylink
Once an HDMI-CEC-compatible device is turned on, the TV will automatically turn on and switch to the correct signal source. Notes • If you do not want to use Philips EasyLink, please do not turn this function on. ADJUST. Press Select [EasyLink]. -
Page 24: Product Information
Supported TV mounts • Supported storage device: USB (only FAT or FAT 32 USB storage devices are supported.） To mount the TV, please purchase a Philips TV • Compatible multimedia file formats: mount or any TV mount compliant with the •... - Page 25 Please follow all instructions provided with the TV mount. TP Vision Europe B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Required Pixel Required Model No. Pitch (mm) Mounting Screws 4 x M6 58PFT5309 400 x 400 (recommended length: 22 mm)
-
Page 26: Troubleshooting
Wait for the TV to cool down before If possible, try to improve the reception reconnecting the power cable. If the light quality by changing the antenna direction continues to blink, please contact Philips or moving devices away from the TV. Customer Care Centre. •... -
Page 27: Sound Issues
Please make a note of your TV model and serial number Digital Content Protection) support can before you contact Philips Customer Service Centre. These numbers are printed on the back/bottom of the delay the time taken for a TV to display TV and on the packaging. - Page 28 Environmental Protection Use Period This logo labelled on the product itself indicates that the Environmental Protection Use Period thereof is 10 years. The Environmental Protection Use Period of electrical information products refers to the time period during which the toxic and hazardous substances or elements contained within the product will not leak or suddenly spoil, and users of such products will not cause any serious environmental pollution or serious damage to human and property.
- Page 30 © 2014 TP Vision Europe B.V. All rights reserved. Document order number: Philips and the Philips' shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.