b) Select Set and then click 【ENTER】, you can see an interface shown as in Figure 4-5.
c) Select left limit and right limit, click 【ENTER】 to set.
d) Use joystick to control PTZ to set limit.
Select start and then click 【ENTER】,system begins to scan according to the left/right
limit you set.
Select stop and then click 【ENTER】, system stops scan.
4.3.5 Pan
On the keyboard click 【PAN】 button, the interface is shown as below. See Figure 4-6.
Select start and then click 【ENTER】button, system begins pan operation.
Select stop and then click 【ENTER】button, system stops pan operation.
4.3.6 Tour
4.3.6.1 Set Tour
a) On the keyboard click 【TOUR】 button, the interface is shown as below. See Figure 4-7.
b) Select set item, the interface is shown as in Figure 2-9.
Figure 4-4
Figure 4-5
Figure 4-6
Figure 4-7
20