Iris/Zoom/Focus; Preset; Scan - Qvis DLA6334 Installation And Operation Manual

3d keyboard
Table of Contents

Advertisement

In this interface, you can use the joystick to control the menu interface of the preview interface of
the speed dome WEB.

4.3.2 Iris/Zoom/Focus

4.3.2.1 Iris
On the keyboard, click 【IRIS】 button, use button 【+】and【-】or turn joystick up/down to
control the iris.
4.3.2.2 Focus
On the keyboard click 【FOCUS】 button, use button 【+】and【-】or turn joystick left/right to
control the focus.
4.3.2.3 Zoom
On the keyboard click 【ZOOM】 button, use button 【+】and【-】or turn joystick clockwise or
counter clockwise to control the zoom.

4.3.3 Preset

On the keyboard click 【PRESET】, the interface is shown as below. See Figure 4-3.
4.3.3.1 Set Preset
a) Use joystick to control PTZ to set preset position.
b) On the keyboard click 【PRESET】 button, you can go to the preset interface.
c) Input preset number and then select set preset, click 【ENTER】 to save preset setup.
4.3.3.2 Go to preset
Select Preset and then input preset number, click 【ENTER】 to go to the corresponding preset
position.
4.3.3.3 Delete preset
Input the preset number at the preset No. item and then select Delete, click 【ENTER】 go
remove it.

4.3.4 Scan

a) On the keyboard click 【SCAN】 button, the interface is shown as below. See Figure 4-4.
Figure 4-3
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dla6336

Table of Contents