Table of Contents
Advertisement
48
CUSTOMIZING SETTINGS
Setting
Tile Mode
Tile Mode
Auto Config.
Position
Size
Natural
Reset
y
PIP/PBP
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Position
Size
y
Key Lock
Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
USB Content
Replays the content in a USB when the power is back on if it is turned off during playing a content.
Recovery
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Displays the model name, software version, serial number, IP address, MAC address, and home
Info.
page.
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to DVI Cable and distributor.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Moving the screen position horizontally and vertically.
Adjust the horizontal and
of the bezel.
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
The touch screen feature is limited while using Tile Mode.
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Adjusts the position of the sub screen (top left, bottom left, top right,
bottom right)
The default value is the bottom right.
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
The Position and Size options are enabled only in PIP mode.
Description
vertical
size of the screen taking into account the size
Advertisement
Table of Contents
