Sound - Philips 43PFL4901 User Manual

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS7

Sound

B B efore you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press and use
2
Use to select TV settings, then press OK.
3
Use to select Sound, then press OK.
Picture
Sound
Features
Installation
Accessibility
4
Use to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
To set your TV to a predefined sound setting.
When you adjust the following settings (Equalizer,
Sonic Emotion Premium and Auto volume leveling),
Personal sound will be set automatically.
Personal
Standard
Auto sound
Vivid
Sports
Movie
Music
News
Adjust the tonal quality for each frequency.
Equalizer
To adjust each level of tonal quality
Press
Adjust the speakers to suit your listening preference.
Balance
To adjust the balance of the right and left speakers
p. 32
to select Setup then press OK.
Auto sound
Equalizer
Balance
Sonic Emotion Premium
Auto volume leveling
TV speakers
Headphone volume
Digital output format
Delta volume
The customized settings you
defined using the Sound menu.
For normal TV viewing.
Enhanced sound.
Clear sound for high action.
Powerful sound settings for a
cinematic experience.
Optimized for music playback.
Set the anchor's voice at a
comfortable volume.
Cursor Cursor
BACK to go back to the previous menu.
Cursor Cursor
This selects sound modes for more spatial or surround sound
reproduction.
Off
Sonic
Emotion
On
Off
Dialog
Sonic
Enhancement
On
Emotion
Off
Bass
Premium
Enhancement
On
Off
Absolute 3D
Sound
On
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Off
Auto volume
leveling
On
You can select the audio output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure Master EasyLink
p. 32
is set to On.
Off
On
TV speakers
Speakers
EasyLink
Adjust headphone volume.
Cursor
Headphone
volume
To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
If a channel or input device is too loud or too soft, navigate to that channel
or input device.
Cursor
Provides the ability to set a custom volume level
for the current channel or input source.
Delta volume
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive value
(+1 to +12)
30
To set Sonic Emotion to off
To set Sonic Emotion to on
To set Dialog Enhancement to off
To set Dialog Enhancement to on
To set Bass Enhancement to off
To set Bass Enhancement to on
To set Absolute 3D Sound to off
To set Absolute 3D Sound to on
To remove the Auto volume
leveling
To reduce volume differences
between the TV commercials and
the programs
No output sound from the unit's
speakers
To output sound from the unit's
speakers
To control audio output from your
connected EasyLink compliant
devices with VOL + / – by using this
unit's remote control.
Cursor
To output PCM format
To output audio in its native format
as Bitstream to connected audio
receiver
Cursor
Continued on next page.
.
English