Connection Test; Setting Status - Philips 43PFL4901 User Manual

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6
P P roxy configuration
2
Use to select Proxy configuration, then press OK.
3
Use to select a setting, then press OK.
Network selection
Wireless network setting
IP configuration
Proxy configuration
•
Do not use is selected for default settings.
•
If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address and
port, select Use.
Do not use
Proxy setting
Proxy address
Proxy port
*
* Items can be selected only when Proxy setting is set to Use.
Note(s)
•
The range of input numbers for the port number is between 0 and 65535. (If you enter a number
larger than 65535, it will be regarded as 65535.)
•
For proxy port, the selected ports may be blocked and not be able to use depending on your
network environment.
•
If the proxy address is entered with blank only, proxy server setting will be set to Do not use.
Proxy setting Do not use
Proxy address
Use
Proxy port
Does not use the proxy server.
Use Uses the proxy server.
Selects the number or word by
*
using , then press OK.
Use or the NUMBER buttons
to input numbers.

Connection test

Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such as IP
address, DNS settings, etc. manually.
1
Use to select Connection test, then press OK.
•
Connection test will start automatically and the test result for home
network and internet will appear right after the connection test
finishes.
•
"Testing..." is displayed while the connection test is in progress.
Home network Internet
Pass Pass
Fail -
Pass Fail
•
If the connection test for internet passes, speed test will start
automatically.
2
Press OK to go to the list on network status confirmation screen.
Note(s)
•
If the connection test for both home network and internet pass, you are ready to use Net TV or
network upgrade functions using the internet without making any additional settings.
•
If the connection test fails, check if the Ethernet cable is connected to this TV properly or if you
have entered all the required details for the wireless LAN connection properly.

Setting status

You can check the status of network settings.
1
Use to select Setting status, then press OK.
•
Network setting list will be displayed.
•
MAC address of this unit will be displayed in the list.
41
Description
Connection test is successfully
completed.
Connection test for home network
failed. Check the connection
settings.
Connection test for internet failed.
Check the connection settings.
Continued on next page.
.
English