Philips 50PUT6102/98 User Manual page 54

Hide thumbs Also See for 50PUT6102/98:
Table of Contents

Advertisement

press OK.
3 - Select UHD 4:4:4/4:2:2, UHD
4:2:0 or UHD Off and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
USB keyboard settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected...
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Mouse settings
To Adjust the motion speed of the USB mouse....
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select Mouse settings, and press OK to start
the mouse speed setup.
Home or Shop
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location...
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select Location > Shop, and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the Location is set to Shop, you can set the
availablility of a specific demo for in store use.
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select Shop setup and press  (right) to enter
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press  (left) repeatedly if necessary, to close
the menu.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press  (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press  OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1 - Press , select General settings and
press  (right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation...
1 - Press , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
54

Advertisement

Table of Contents
loading

This manual is also suitable for:

50put61026102 series

Table of Contents