Table of Contents
Advertisement
Connecting Multiple Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out
connector of Monitor 1 and connect the other end to the DP In connector of the other product.
NOTE
•
If you set the tile mode using DVI-D or HDMI, you will not be able to watch HDCP-encrypted content.
•
If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
•
DP Cable - Use a DP cable that is certified to DP 1.1a standard or higher.
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
21
Advertisement
Table of Contents
