Basic settings
Basic settings
You can configure the appliance to meet your needs.
Basic settings
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Sensor setting
Extra Dry
1
Factory setting (may vary according to model)
Display text
Selection
1
H:04
H:00 - H:07
1
r:05
r:00 - r:06
1
SE:00
SE:00 - SE:02
1
d:00
d:00 - d:01
Basic settings en
Description
Set the water softening system to
your water hardness.
→ "Setting the water softening sys-
tem", Page 27
Level H:00 switches the water
softening system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 29
Switch the rinse aid system off with
level r:00.
Set the water sensor for identifying
soiling.
→ "Sensors", Page 12
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d:01" or off
"d:00".
37