Cleaning The Nozzles; Storing Your Dishwasher - Samsung DW60J9950 Series User Manual

Cleaning and maintaining your
dishwasher

CLEANING THE NOZZLES

If your dishwasher does not seem to be cleaning adequately or the nozzles seem clogged, you can clean
each of the nozzles. When removing the nozzles, take care as they may break.
Upper nozzle
1. Pull the upper rack towards the front.
2. Check whether the nozzle holes are clogged by food
particles.
3. If cleaning is needed, remove the nozzle.
4. To remove the nozzle, unfasten and remove the nut,
and then remove the nozzle.
5. Clean the nozzle, re-insert it, and fasten the nut.
6. When fastening the nut, turn it fi rmly by hand.
7. Check whether the nozzle is engaged correctly by
rotating it by hand.
Top nozzle
1. Check whether the nozzle holes are clogged by food
particles.
2. If cleaning is needed, remove the nozzle.
3. To remove the nozzle, pull out the upper rack fi rst,
unfasten the nozzle cap by turning it counterclockwise,
and then remove the upper nozzle.
4. Clean the nozzle, re-insert it, and then fasten the
nozzle cap to the nozzle by turning the cap clockwise.
5. Check whether the nozzle is engaged correctly by
rotating it by hand.

STORING YOUR DISHWASHER

If you need to store your dishwasher for an extended period of time, fi rst drain the unit fully and then
disconnect the water hose.
Your dishwasher can become damaged if water is left in the hoses and internal components before storing
it. After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
BU_DW9000H-00156A-07_EN.indd 30 BU_DW9000H-00156A-07_EN.indd 30
English - 30
1
2
Cap nozzle
2016-09-20 2016-09-20 12:31:45 12:31:45