Philips Azur GC4444 Manual page 11

 Set the required ironing temperature (see chapter 'Preparing for
use', section 'Setting the temperature').
after ironing
1 Remove the mains plug from the wall socket.
 If you have been steam ironing, empty the water tank.
 Let the iron cool down in a safe place.
Features
Spray function
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
 Press the spray button several times to moisten the article to be
ironed (Fig. 10).
Steam boost function
A steam boost from the special Steam Tip soleplate helps remove
stubborn creases. The steam boost enhances the distribution of steam
into every part of your garment.
The steam boost function can only be used at temperature settings
between 3 and MAX.
1 Press and release the steam boost button (Fig. 11).
Vertical steam boost
1 You can also use the steam boost function when you hold the iron
in vertical position (Fig. 12).
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
4239.000.6222.4.indd 11
EnGlISh
11
16-11-2007 14:07:06