Table of Contents

Advertisement

Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
1
Select a music track, and then press OK.
2
BACK, and go to the picture
Press
folder.
3
Select a picture, and then press
start the slideshow.
4
Press
to stop slideshow.
5
Press
again to stop music.

Radio

Listen to FM radio on your home theater, and
store up to 40 radio stations.
What you need
FM antenna.
Note
AM and digital radio are not supported.
If no stereo signal is detected, you are
prompted to install the radio stations again.
For the best reception, place the antenna away
from the TV or other sources of radiation.
Tune stations
1
Connect the FM antenna as described in the
quick start guide.
2
Press SOURCE repeatedly until RADIO
appears on the display panel.
» If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO INSTALL...
PRESS PLAY appears on the display
panel. Press
3
Press the following buttons to listen or to
change radio stations:
(Play) to
(Play).
Button
Action
Select a preset radio station.
/
or
Alphanumeric
buttons
Navigation
Search for a radio station.
buttons (left/
right)
Navigation
Fine tune a radio frequency.
buttons (up/
down)
Press to stop the installation of
radio stations.
BACK
Press and hold to erase the
preset radio station.
OPTIONS Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
To listen to a preset station, press
or
.
To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2
Press +/- (Volume) to change the volume.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
2
Press .
3
Press and hold
(Play) to toggle between
50 kHz or 100 kHz.
EN
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts9241Hts9221

Table of Contents