Samsung SM-G9600/DS User Manual page 195

Settings
• C overing the fingerprint recognition sensor with protective films, stickers, or other
accessories may decrease the fingerprint recognition rate. If the fingerprint recognition
sensor is initially covered with a protective film, remove it before using the fingerprint
recognition sensor.
• E nsure that the fingerprint recognition sensor and your fingers are clean and dry.
• I f you bend your finger or use a fingertip, the device may not recognise your fingerprints.
Make sure to cover the entire fingerprint recognition sensor with your finger.
• I n dry environments, static electricity can build up in the device. Avoid using this feature
in dry environments or before using the feature, discharge static electricity by touching a
metal object.
Registering fingerprints
1
On the Settings screen, tap Biometrics and security → Fingerprints.
2
Read the on-screen instructions and tap Continue.
3
Set a screen lock method.
4
Swipe your finger downwards over the fingerprint recognition sensor.
Repeat this action until the fingerprint is registered.
5
When you are finished registering your fingerprints, tap Done.
195