Introduction
VibrAlert and Call Alert
Your microTALK radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
Mode Button
Channel Buttons
Operation
To change call settings:
1. Press the Mode button
until the Call Setting icon
flashes on the display.
The current setting ("01"
vibrate + ring, "02" vibrate
only or "03" ring only)
is displayed.
2. Press the Channel Up or
Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button
to enter the new setting
and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
Customer Assistance
Warranty
VibrAlert + Ring
VibrAlert Only
Ring Only
23
•