Installing Appliances Next To Each Other; Changing Over The Door Hinges - Bosch KS36VBI30/03 Installation Instructions Manual

Free-standing appliance
Hide thumbs Also See for KS36VBI30/03:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
Installing appliances
next to each other
Fig. 2
When installing two appliances, ensure
that the refrigerator is on the left and the
freezer is on the right.
The right side panel of the refrigerator is
heated slightly. This prevents
condensation from forming between the
appliances.
Attaching spacers
Fig. 3
1. On the right side of the refrigerator
degrease the adhesive areas with
petroleum ether or spirit.
2. Stick spacers in all four corners at
a distance of 5 cm from the side
edges to ensure a minimum gap
between the appliances.
Note
You can purchase a connection set from
your dealer.
Changing over
the door hinges
(if required)
We recommend that you have the door
hinges changed over by our customer
service. You can find out the costs for
changing over the door hinges from your
appropriate customer service.
ã=
Warning
While changing over the door hinges,
ensure that the appliance is not
connected to the power supply. Pull out
the mains plug beforehand. To prevent
damaging the back of the appliance,
place adequate padding underneath.
Carefully place the appliance on its back.
Change over the door hinges
in numerical sequence. Fig. 1
Note
If the appliance is placed on its back,
ensure that the wall spacer is not fitted.
en
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsn36bi30/06Ks36vbi30/04Ks36vbi30/07

Table of Contents