5 Listen to FM
radio
Prepare FM antenna
1
Fully extend and adjust the position of
the pig-tail antenna until you find the best
reception.
2
Fix the antenna with an adhesive tape (not
supplied) as illustrated.
Note
•
To prevent interference, position the antenna as far as
possible from any other electrical appliances.
Tune to FM radio stations
1
Press SOURCE repeatedly to switch to FM
tuner mode.
2
Press and hold TUNE - or TUNE + for
two seconds.
» The clock radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more radio
stations.
8
EN
To tune to a station manually:
In tuner mode, press TUNE - or TUNE +
•
repeatedly to select a frequency.
Store FM radio stations
automatically
In FM tuner mode, press and hold SCAN for
two seconds.
» All available FM radio stations are stored
automatically.
» The first stored radio station broadcasts.
Store FM radio stations
manually
You can store up to 20 FM radio stations.
1
Tune to an FM radio station.
2
Press and hold PRESET for two seconds.
» The preset number begins to blink.
3
Press TUNE - or TUNE + to select a
number.
4
Press PRESET again to confirm.
5
Repeat steps 1 to 4 to store other stations.
Tip
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press PRESET repeatedly to
select a preset station.