Contents 1 Important Help and support Safety Care for your product Care of the environment Compliance 2 Your SoundBar Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up Pair up with the subwoofer Placement Connect to TV Connect audio from TV and other devices 8 4 Use your SoundBar Adjust the volume...
• Disconnect the product from the power For extensive online support, visit outlet before lightning storms. www.philips.com/support to: • When you disconnect the power cord, • download the user manual and the quick always pull the plug, never the cable.
Risk of overheating! Care for your product • Never install this product in a confined space. Always leave a space of at least four Use only microfiber cloth to clean the product. inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
2 Your SoundBar Compliance Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your This product complies with the radio SoundBar at www.philips.com/welcome. interference requirements of the European Community. Hereby, Gibson Innovations declares that...
(Previous/Next) Remote control Skip to the previous or next track in USB mode. This section includes an overview of the (Play/Pause) remote control. • Start, pause or resume play in USB mode. e BASS +/- Increase or decrease bass. f Volume control •...
Connectors Wireless subwoofer This section includes an overview of the The SoundBar comes with a wireless subwoofer. connectors available on your SoundBar. a CONNECT (connect) Press to to enter the pairing mode for the subwoofer. b Subwoofer indicator • Audio input from a USB storage •...
3 Connect and set If the pairing fails, repeat the steps above. Placement Place the subwoofer at least 1 meter (3 feet) This section helps you connect your SoundBar away from your SoundBar, and ten centimeters to a TV and other devices, and then set it up. away from the wall.
Option 1: Connect audio through a digital optical cable Best quality audio Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC Using an optical cable, connect the connector on the TV. OPTICAL connector on your SoundBar to The HDMI ARC connector on the TV •...
4 Use your Option 3: Connect audio through analog audio cables SoundBar Basic quality audio Using an analog cable, connect the AUX connectors on your SoundBar to the This section helps you use the SoundBar to play AUDIO OUT connectors on the TV or audio from connected devices.
Equalizer On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS Change the high frequency (treble) and low HTL3110B to start connection (see the frequency (bass) settings of the SoundBar. user manual of the Bluetooth device on Press TREBLE +/- or BASS +/- to change how to enable Bluetooth).
To exit Bluetooth, select other source. USB storage devices • When your switch back to Bluetooth mode, Bluetooth connection remains Enjoy audio on a USB storage device, such as an active. MP3 player and USB flash memory, etc. Note What you need •...
You can reset this product to the default settings programmed at the factory. Check the latest software version on In any source mode, on the remote control www.philips.com/support. press Volume-, BASS -, and TREBLE - in • Search for your model and click on sequence within three seconds.
6 Wall mount » If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the Note USB storage device. • Press to start the update. Improper wall mounting may result in accident, injury or damage.
Main unit • Subwoofer: • Power supply: 15W (1%THD, 4ohm, 30Hz-80Hz) • Model (Philips branded AC power • RMS Total output power: adapter): DYS602-210309W; 120W RMS (+/- 0.5 dB, 10% THD) AS650-210-AA309 • Frequency response: 20 Hz-20 kHz / ±3 dB •...
To deactivate Bluetooth connection, press the following points before you request service. and hold the Bluetooth button on the If you still have a problem, get support at remote control. www.philips.com/support. • To activate Bluetooth connection, enable Bluetooth connection on your Bluetooth Main unit device, or enable Bluetooth connection via the NFC tag (if available).
Page 18
Audio and video are not synchronized. • For some Bluetooth, the Bluetooth Press AUDIO SYNC +/- to synchronize • connection can be deactivated the audio with the video. automatically to save power. This does not indicate any malfunction of the SoundBar. Error message is displayed on the display panel.
Page 19
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Page 20
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.