System Parameter Table; Core Commands - Matrix Switch Corporation MSC-HD44AAS Product Manual

Access Parameter access. R for Readable settings, W for writable settings, or RW for both.
Set Default parameter memory used with the
both. Commands which use only Stored memory require a reboot to become Active.
Table 9: System Parameter Table Columns

3.7.1 System Parameter Table

Parameter Value
ctl.mascot.ver String
ctl.serial.baud Number RW
ctl.serial.log Boolean RW
ctl.serial.proto String
ctl.serial2.baud Number RW
ctl.serial2.log Boolean RW
ctl.serial2.proto String
mtx.serial Number R
mtx.sync Boolean RW
net.dhcp Boolean RW
net.gateway IP
net.ip IP
net.mac MAC
net.netmask IP
pnl.cmdEn Boolean RW
pnl.ip IP
sys.arch String
sys.firmware String
sys.name String

3.8 Core Commands

This section outlines commands considered to be core MASCOT protocol commands and consists of matrix
routing, I/O label, preset, and other primary system commands.
Command Arguments
DestNames [Dest][Lvl][Label]
E [0 | 1]
Firmware
Help
Page 24 of 61
MSC-HD44AAS Product Manual
Access Set Description
R Mascot version in the form MAJOR.MINOR (3.0 for example).
AS RS-232 serial port baud rate in bits/second.
AS RS-232 serial port protocol log enable.
RW AS RS-232 serial port protocol selection ("mascot", "svs", etc).
AS RS-485 serial port baud rate in bits/second.
AS RS-485 serial port protocol log enable.
RW AS RS-485 serial port protocol selection ("mascot", "svs", etc).
Current matrix serial number, incremented on every routing change.
AS Keep current routing state stored to preset 0. Effectively retains last
matrix routing state even after a restart or power cycle.
S Network interface DHCP enable.
RW S Network gateway address.
RW S Network interface IP address.
R Network interface MAC address.
RW S Network interface mask.
AS Panel command macro enable.
RW AS Remote IP address for panel interface to control.
R System architecture ("Pyxis", "Carina", "Lynx", etc).
R Firmware series and version ("Pyxis 1.1.7" for example).
RW AS System name identifier.
Description
Destination I/O names command.
Matrix connection echo enable command.
System firmware version.
Command help reference.
© 2013-2018 Matrix Switch Corporation
Set Command. A for Active, S for Stored, or AS for
www.matrixswitch corp.com