Table of Contents
Advertisement
Fault
Freezer compartment
temperature display flashes,
Fig. "/4
Warning signal sounds
The alarm button is lit.
Fig. "/5
The freezer compartment is
too warm!
Frozen food is at risk!
Freezer compartment
temperature display flashes.
Fig. "/4
Appliance is not cooling,
temperature display and light
are lit.
Automatic super freezing
does not switch on.
Possible cause
Appliance is open.
Ventilation openings are
covered up.
Too much food was placed in
the freezer at once.
A fault caused the freezer
compartment to become too
warm in the past.
Showroom mode is
switched on.
Remedial action
To switch off the warning signal, press alarm
button Fig. "/5.
Close the appliance.
Ensure that there is adequate ventilation.
Do not exceed the freezing capacity.
When the fault has been eliminated, the alarm
display goes out shortly afterwards.
When the alarm button 5 is pressed, the
temperature display stops flashing. Fig. "/4
The temperature display indicates for 5
seconds the warmest temperature which was
reached in the freezer compartment.
Hold down alarm button, Fig "/5, for
10 seconds until an acknowledgement signal
sounds.
After a short time check whether your
appliance is cooling.
The appliance decides independently whether
automatic Super freezing is required and
automatically switches it on or off.
en
23
Advertisement
Table of Contents
