Table of Contents
Advertisement
Sensors
en
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the Cottons programme is shown at
position 1.
Press the Temperature button and,
2.
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
Changing the signal volume
Use the Ready in + or - button to
change the following settings at the
corresponding programme selector
positions:
2: The volume of the information
■
signals and/or
3: The volume of the button signals.
■
Exit setting mode or:
Selecting/deselecting the
appliance automatic switch-
off
With the programme selector in position
4, press the Ready in + or - button to
turn the automatic switch-off function on
or off.
Exit setting mode or:
Switching the drum-care
information signal on/off
depending on the model
32
0 = off, 1 = quiet, 2 =
medium, 3 = loud, 4 =
very loud
With the programme selector in position
5, press the Ready in + or - button to
switch the Drum Clean information
signal on or off.
Exiting setting mode
To exit and save the settings, press the
# button.
The appliance is switched off. The
selected settings will take effect the next
time the washing machine is switched
on.
H
Sensors
S e n s o r s
Automatic load sensing
Depending on the type of fabric and
load, the automatic load sensing
function optimally adjusts the water
consumption and programme duration
in each programme.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Place large and small items of
Note:
laundry evenly in the drum.
~ Page 25, ~ Page 39
Advertisement
Table of Contents
