Step 13: Level Dishwasher - GE GDF610PSJ5SS Installation Instructions Manual

Dishwasher Installation

STEP 13: LEVEL DISHWASHER

IMPORTANT –
dish rack operation, wash performance and door operation.
The dishwasher must be leveled left to right and front to back.
This ensures the dish racks will not roll in or out on their own,
close without hitting the side of the tub.
• Remove the lower dish rack and place a level on the door and
lower rack track as shown below.
• Adjust the level of the dishwasher by individually turning the
4 legs on the bottom of the dishwasher as shown. Ensure all 4
legs are firmly in contact with the floor.
Turn Legs
to Adjust
• The dishwasher is properly leveled when the level indicator is
centered left to right and front to back. Also, the dishwasher
door should close without hitting the side of the tub.
• Replace the lower rack.
10
Dishwasher must be level for proper
Tip: Prevent unnecessary service charges. Verify dishwasher
is leveled.
Pull the dish racks half way out. They should stay put. Open
without hitting the side of the tub. If the racks roll on their own,
or the door hits the side of tub, relevel the dishwasher.