Acer X241 Service Manual page 42

GET THE PLASTIC SCREW AND INSERT IT
INTO THE INVERTER BOARD
STICK 1*PCS MYLAR ON THE INVERTER
BOARD
SCAN THE FLOW CARD AND INVERTER
BOARD CODE
PUT 2*PCS BRACKET TO THE INVERTER
BOARD
LOCK UP 4*PCS SCREWS( M4.0*6-B) TO THE
INVERTER BOARD AS LEFT SHOW
MOVE THE INVERTER BOARD TO THE FRONT
OF PRODUCTION LINE
PUT THE PANEL TO THE PRODUCTION LINE
TEAR OFF THE PLASTIC FILM