Philips AVENT SCF332/21 Manual page 15

2
4X AA
1
6 Push in the inner part of the cushion as far as possible and make sure
that it is perfectly sealed all around the rim of the pump body.
7 Press in between the petals to remove any trapped air.
Note: Place the cover over the cushion to keep the breast pump clean
while you prepare for expressing.
Warning: Always use the breast pump with a cushion.
8 Insert the adapter into the wall socket and insert the plug at the other
end into the motor unit.
The adapter reference code is indicated on the bottom of the appliance.
Only use the indicated adapter with the appliance.
- For battery operation (SCF332, SCD223/10 and SCD292/22), turn the
bottom of the motor unit in the direction indicated by the marks on
the bottom (step 1) and remove it (step 2). Insert four new 1.5V AA
batteries (or 1.2V, in case of rechargeable batteries) into the battery
housing. Check the markings on the housing of the battery for the
correct polarity. Reattach the bottom to the motor unit.
Note: A new set of batteries provides 1-3 hours of operating time.
Rechargeable batteries will lose capacity over time and may cause a
decrease in operating time.
English
15