Table of Contents

Advertisement

Available languages

Available languages

English
10

Caution

-
Do not use the breast pump if the silicone diaphragm appears to be
damaged or broken. See chapter 'Ordering accessories' for information
on how to obtain replacement parts.
-
Do not use antibacterial or abrasive cleaning agents when you clean
breast pump parts.
-
If you are not going to use the appliance for a long period of time,
remove the batteries to prevent leaking of batteries.
Warnings to avoid breast and nipple problems and pain:
-
Do not attempt to remove the pump body from your breast while under
vacuum. Turn off the appliance and break the seal between your breast
and the pump funnel with your finger. Remove the pump from your breast.
-
Never use the breast pump while you are sleepy or drowsy to avoid lack
of attention during use.
-
Always turn off the breast pump before you remove the pump body from
your breast to release the vacuum.
-
Never use any accessories or parts from other manufacturers or that Philips
Avent does not specifically recommend. This could lead to improper working
of the appliance and could influence Electromagnetic Compatibility (EMC). If
you use such accessories or parts, your warranty becomes invalid.
-
Do not continue pumping for more than five minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
-
If the process becomes very uncomfortable or painful, stop using the
pump and consult your breastfeeding advisor.
-
If the pressure generated is uncomfortable or causes pain, turn off the
appliance, break the seal between the breast and the pump body with
your finger and remove the pump from your breast.
-
Never drop or insert any foreign object into any opening.
Caution to prevent damage to and malfunctioning of the product:
-
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to
avoid overheating and deformation of these parts.
-
Never put the motor unit or the adapter in water or in a dishwasher.
-
Although the breast pump is compliant with applicable EMC directives, it may
still be susceptible to excessive emissions and/or may interfere with other
equipment. A consequence can be that the breast pump turns off or goes into
error mode. To prevent interference, keep other electric equipment away from
the breast pump during expressing (see 'Technical information').
-
There are no user serviceable parts inside the motor unit of the breast
pump. No modification of equipment is allowed. If you do, your warranty
becomes invalid.
-
Do not short-cut the supply terminals of the batteries.

Advertisement

Table of Contents
loading

Table of Contents