User Controls; Using The Shortcut Menu - Acer GR235H Manual

USER CONTROLS

Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.

Using the Shortcut Menu

Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings.
Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access
the scenario modes.
AUTO Auto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus (only for Analog mode).
MENU OSD functions
Press this botton to activate the OSD menu.
INPUT Input Key
Use Input key to select from different video sources that may be connected to
your monitor.
(a) VGA input (b)
As you cycle through the sources you will see the following messages on right top
side of screen to indicate currently selected input source. It may take 3
seconds for the image to appear.
VGA or or HDMI
If either VGA input
nected, a floating dialog box indicates:
"No Cable Connect" or "No Signal"
input (c) HDMI
is selected ,but the VGA and
EN-12
input
cables are not con-