Table of Contents
Advertisement
To activate or deactivate the alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
appears when the timer is activated.
»
Tip
•
If CD/USB/iPod source is selected, while the audio
cannot be played, the unit switches to the tuner source
automatically.
Set the sleep timer
Note
•
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
» When sleep timer is activated,
To deactivate the sleep timer
Press SLEEP repeatedly until [OFF] (off) is displayed.
Listen through the headphone
Plug a headphone into the
Play from external audio
device
With this unit, you can play audio from an
external audio device like MP3 player.
1
Connect the supplied MP3 Link cable to
• the MP3-LINK socket.
• the audio output socket of an external
device.
2
Press USB/MP3 LINK repeatedly to select
MP3 link mode.
3
Start to play the external device (see the
device's user manual).
is displayed.
socket on the unit.
7 Product
information
Note
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
MP3 Link Input
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
Tuner (FM)
Tuning range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
2 X 10 W RMS
80 Hz - 16 kHz,
± 3 dB
≥60 dB
0.5 V RMS 20 kohm
Semiconductor
12 cm/8 cm
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
24 Bits/44.1 kHz
<1 5 % (1 kHz)
60 Hz - 16 kHz
>55 dBA
87.5 - 108 MHz
50 KHz
<22 dBf
<43 dBf
EN
15
Advertisement
Table of Contents
