Table of Contents
Advertisement
Preparation
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the countdown
(3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the supply
water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
0th Level
0-5
1st Level
6-9
2nd Level
10-15
3rd Level
16-19
4th Level
20-24
5th Level
25-62
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
Dishwasher / User's Manual
Hold the test strip in
the water for about
a second.
German Water
French Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
0th Level
1
Remove the test
Wait for 1 minute.
strip from the water
and shake it.
Water Hardness Level Indicator
Press the Time Delay key to switch the water hardness level
to position 1. (r1)
Press the Time Delay key to switch the water hardness level
to position 2. (r2)
Press the Time Delay key to switch the water hardness level
to position 3. (r3)
Press the Time Delay key to switch the water hardness level
to position 4. (r4)
Press the Time Delay key to switch the water hardness level
to position 5. (r5)
1st Level
2nd Level
1
2
The test strip shows
you the hardness
level.
3rd Level
4th Level 5th Level
3
4
13 / 45 EN
5
Advertisement
Table of Contents
