Table of Contents
Advertisement
Preparation
Unpack the test
Open the tap and
strip.
let the water flow for
approx. 1 minute.
After detecting the water hardness:
1. After turning on the machine, press Delayed Start and P+ keys simultaneously. After the
countdown (3, 2, 1) is displayed keep the keys pressed for a while.
2. Press P+ key to activate the position.
3. Using Delayed Start key, adjust water hardness level according to the hardness of the supply
water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
Perform the same hardness level adjustment that you have set on the control panel also with the
regeneration adjustment switch. For example, if you have adjusted to "3" in the control panel,
also set the regeneration adjustment switch to 3.
Regeneration Adjustment Switch
Dishwasher / User's Manual
Dip in the test strip
into the water for 1
second.
German Water
French* Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
Level 0
1
Take out the strip
Wait for 1 minute.
from the water and
shake it.
Water Hardness Level Indicator
Press the Delayed Start key to switch the water hardness
level to position 1. (r1)
Press the Delayed Start key to switch the water hardness
level to position 2. (r2)
Press the Delayed Start key to switch the water hardness
level to position 3. (r3)
Press the Delayed Start key to switch the water hardness
level to position 4. (r4)
Press the Delayed Start key to switch the water hardness
level to position 5. (r5)
Level 1
Level 2
1
2
Make the necessary
adjustment
according to the test
strip.
Level 3
Level 4
Level 5
3
4
13 / 40 EN
5
Advertisement
Table of Contents
