Homewhiz Function; Homewhiz Setup And User Account; Settings - Beko DIN59530 AD User Manual

HOMEWHIZ FUNCTION

6
You can check your dishwasher and learn
about its status via your smart device with
the HomeWhiz function.
C
HomeWhiz only runs on a
frequency band of 2.4GHz.
C
You can use your machine via
your smart device while the
function is selected. You can
monitor your machine through
the application when the
function is not selected.
C
You can check the indicator
on the product to see if the
function is enabled or not.
If the function is disabled, the
HomeWhiz indicator will be off
or continuously flash at short
intervals. For example, when
the wireless connection setting
is off or the door of the machine
is open.
C
The function will be disabled
when the door of the
dishwasher is open or when
operations regarding On/Off are
performed on the machine. It
can be enabled again with the
remote control key.
The display when HomeWhiz is enabled.
40 /52 EN
HomeWhiz Setup and User
Account Settings
Install the HomeWhiz application from the
application store of your smart device to
use the WLAN function of your machine.
Make sure that your smart device is
connected to the internet to use the
application.
If you are using the application for the first
time, complete the registration process
with your e-mail address on the application.
Once you've completed the registration
process, you can use all HomeWhiz
supported appliances in your house
through this account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to see the
appliances paired with your account. You
can perform the user pairing processes of
these appliances from this page.
Initial setup
1 Tap "Add/Remove Appliance" section on
the HomeWhiz application.
2 Tap "Tap here to setup a new
appliance".
3. When the machine is off, press the
on/off key and the remote control key
simultaneously to enter the settings
menu. Press the setting key to set the
product to "wireless connection setup".
4. Then, in the settings section of your
smart device, connect to "HomeWhiz
xxx-xxxx" network under the wireless
connection settings. Password of the
network can be seen on the HomeWhiz
application.
5. Connect your smart device to the
HomeWhiz network and return
to the HomeWhiz application. On
the application, you can see the
Dishwasher / User's Manual