Table of Contents
Advertisement
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
For more information, in Help, press the colour
key
Keywords and look up Switching on for
more information.
2.5
Antenna cable
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
For 5362 series
2.6
Satellite dish
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
For 5362 series
7
Advertisement
Table of Contents
