Accessibility - Philips 4000 Series User Manual

Set the Master EasyLink to On or Off. The following additional settings
will be grayed out when you set them to Off.
Off
Master
EasyLink
On
This unit will turn on when the power on signal is sent from your connected
EasyLink device.
Off
Auto TV On
On
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit's remote control.
Off
RC key
forwarding
On
Note(s)
•
Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
Off
HDMI-ARC
(HDMI 1 only)
On
Return your settings to default values
You can return settings to their default values.
1
Use to select Restore default settings, then press OK.
2
Use to select Reset AV settings or Reset all settings, then press
OK.
Return picture and sound settings to their default
Reset AV settings values. The channel installation settings are not
affected.
Reset all settings Return all the settings to their default values.
Disables all EasyLink.
Selects if you have connected an
external device that is compatible with
the EasyLink function.
This unit stays in Standby mode even
if you turn on your connected EasyLink
device.
This unit turns on automatically when
you turn on your connected EasyLink
device.
Disable RC key forwarding.
PLAY, PAUSE / STOP /
FWD / REV / VOL + / – /
(MUTE) / OPTIONS / / OK /
BACK / the NUMBER buttons can
be used to control your connected
EasyLink devices by this unit's remote
control.
Disable HDMI-ARC.
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.

Accessibility

1
Press and use to select Setup then press OK.
2
Use to select TV settings, then press OK.
3
Use to select Accessibility, then press OK.
Picture Voice guide
Sound Caption settings
Features Digital audio preferences
Installation
Accessibility
4
Adjust the following items.
Voice guide
Lets you configure voice guide and its settings.
1
Use to select Voice guide, then press OK.
Off
Voice guide toggle
On
Fast
Speed Normal
Slow
High
Pitch Normal
Low
Verbose
Verbosity
Succinct
Loud
Volume level Normal
Soft
33
To set Voice guide off
To set Voice guide on
Set voice guide speed based on
your preference
Set voice guide pitch based on
your preference
Set voice guide explanation
verbosity based on your
preference
Set voice guide volume based on
your preference
Continued on next page.
.
English