Change The Transmission Power Control - NETGEAR RAXE500 User Manual

4. Select Wireless.
The Wireless Setup page displays.
5. Select or clear the Enable OFDMA in 2.4GHz check box.
Selecting this check box turns on OFDMA in the 2.4 GHz radio band and clearing
this check box turns off OFDMA in the 2.4 GHz radio band.
6. Select or clear the Enable OFDMA in 5GHz check box.
Selecting this check box turns on OFDMA in the 5 GHz radio band and clearing this
check box turns off OFDMA in the 5 GHz radio band.
7. Select or clear the Enable OFDMA in 6GHz check box.
Selecting this check box turns on OFDMA in the 6 GHz radio band and clearing this
check box turns off OFDMA in the 6 GHz radio band.
OFDMA in 6 GHz is enabled by default.
8. Click the Apply button.
Your settings are saved.

Change the Transmission Power Control

By default, you router's transmission power is set to 100%. This allows your router to
give you whole home WiFi coverage. If you don't need whole home WiFi coverage, and
you also want to save power consumption while using your router, you can lower the
transmission power of your router.
To change the transmission power control:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays.
Manage Network Settings
Nighthawk AXE11000 Tri-Band WiFi 6E Router
81 User Manual