NETGEAR RAXE500 User Manual page 27

3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. In the WAN Preference section, select one of the following options:
• Internet Port (1 Gbps). Select this option if you connected a modem to the
Internet port on your router.
• Multi-Gig Port (2.5/1 Gbps). Select this option if you want to use the Multi-Gig
port for your Internet connection. For more information, see Get Multi-Gig Internet
With the Multi-Gig Port on page 31.
• Multi-Gig Internet (1 Gbps + 1 Gbps). Select this option if you want to set up
Multi-Gig Internet and use the Internet port and Ethernet port 1 for your Internet
connection. For more information, see Get Multi-Gig Internet With Internet Port
Aggregation on page 31.
6. In the Does your Internet connection require a login? section, leave the No radio
button selected.
7. If your Internet connection requires an account name or host name, click the Edit
button in the Account Name section and enter the account name.
8. If your Internet connection requires a domain name, type it in the Domain Name (If
Required) field.
For the other sections on this page, the default settings usually work, but you can
change them.
9. Select an Internet IP Address radio button:
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your
ISP automatically assigns these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
10. Select a Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
Specify Your Internet Settings
Nighthawk AXE11000 Tri-Band WiFi 6E Router
27 User Manual