Table of Contents
Advertisement
Quick Links
Optimax Heated Retail Merchandisers
MODEL NUMBERS
Thank you for buying a Victor Unit. We hope and expect that you will get many years of
satisfactory use from your purchase.
In order to achieve the best results from your equipment please read, and follow, the
installation, operating, cleaning and maintenance instructions below. Failure to follow
them may affect the warranty.
1.
UNPACKING AND ASSEMBLY
All protective coating used on stainless steel surfaces must be removed prior to use. The
exposed surfaces can then be wiped clean with a damp cloth, using a mild detergent or
soap if necessary.
DO NOT USE ANY ABRASIVE MATERIAL OR FORM OF BLEACH FOR CLEANING PURPOSES.
Please see cleaning section of these instructions.
Four Castors are fitted, two of which are braked.
2.
INSTALLATION
Where the appliance is to be positioned in close proximity to a wall, partition, kitchen
furniture, decorative finishes, etc., it is recommended that they be made of a non
V
RMH65E
Assisted service 650 wide
RMH100E
Assisted service 1000 wide
RMH130E
Assisted service 1300 wide
RMH65SP
Pass through 650 wide
RMH100SP
Pass through 1000 wide
RMH130SP
Pass through 1300 wide
RMH65S
Self service solid back 650 wide
RMH100S
Self service solid back 1000 wide
RMH130S
Self service solid back 1300 wide
RMH65SW
Self service – wall 650 wide
RMH100SW
Self service – wall 1000 wide
RMH130SW
Self service – wall 1300 wide
1
Advertisement
Table of Contents
Related Manuals for Victor RMH65E
Summary of Contents for Victor RMH65E
- Page 1 RMH130SW Self service – wall 1300 wide Thank you for buying a Victor Unit. We hope and expect that you will get many years of satisfactory use from your purchase. In order to achieve the best results from your equipment please read, and follow, the installation, operating, cleaning and maintenance instructions below.
- Page 2 combustible material or clad in a suitable non-combustible heat insulating material and that the closest attention be paid to fire preventative regulations. The appliance is fitted with a 13 Amp fused plug and only requires connection to a suitable 13 Amp socket outlet. This model is suitable for 230 – 240V A.C. supply only. Ensure that the electricity supply is as stated on the model’s data plate.
- Page 3 The controllers in your retail merchandiser have been preset in the factory at 95 Should your application require a higher or lower setting, the operating temperature can be changed to any temperature between 85 and 105 C, you can’t set the temperature outside of this range.
- Page 4 5. REPLACING FLOURESCENT LAMPS Turn off power to the unit. If the bulb has just failed it may be HOT. Grip the bulb at both ends, near the connectors and twist the bulb approximately Degrees. Gently pull the bulb out of the connectors. Reverse this process to fit, ensuring that the bulb is held firmly and correctly within the connectors before releasing.
- Page 5 Victor Manufacturing Ltd is renowned for its reliability and Victor Manufacturing Ltd provides on-site warranty in case of failure included in the purchase price, which covers the costs of spare parts and labour on your Victor Manufacturing Ltd goods from the date of invoice for a period of 12 months.
- Page 6 Victor Manufacturing Ltd will not provide warranty repairs if in our opinion the problem resulted from externally caused damage, use outside the goods specification, faults caused by inexperienced or non-approved repairers.
- Page 7 Warranty repairs are carried out between 9:00 a.m. and 5:00 p.m. Monday – Friday. Access required outside normal working hours may incur charges. Registered Office: Victor Manufacturing Ltd Lonsdale Works, Gibson Street, Bradford, BD3 9TF Tel: 01274 722 125 Fax: 01274 307 082...
Need help?
Do you have a question about the RMH65E and is the answer not in the manual?
Questions and answers