Acer Veriton 5800 Manual page 44

Parameter
On-Chip Primary/Secondary PCI IDE
On-Chip SATA Mode
USB 2.0 Controller
USB Controller
USB Keyboard Support
USB Mouse Support
Azalia Codec
Onboard H/W LAN
Onboard LAN Boot ROM
PS2 Keyboard Wakeup
PS2 Mouse Wakeup
Onboard Serial Port 1/2
UART Mode Select
42
Description
This feature allows you to enable or disable the
on-chip IDE port. If a hard disk controller card is
used, set this item to Disabled.
This feature allows you to select the on-chip
SATA mode.
DIsabled: Disable the SATA controller
Auto: Auto arranged by BIOS
Combined: PATA and SATA are combined. Max
of 2 IDE drives in each channel.
Enhanced: Enable both SATA and PATA. Max of
6 IDE drives are supported.
Non-Combined: SATA is operating in legacy
mode.
Enable this item if the system supports USB 2.0
This item is used to enable or disable the on-chip
USB
This item lets you enable or disable the USB
keyboard driver within the onboard BIOS. The
keyboard driver is simulates legacy keyboard
command and lets you use a USB keyboard
during POST or after boot if you do not have a
USB driver in the operating system
This item lets you enable or disable the USB
mouse driver within the onboard BIOS. The
keyboard driver simulates legacy mouse
command and lets you use a USB mouse during
POST or after boot if you do not have a USB
driver in the operating system.
This feature allows you to enable or disable the
Azalia Audio.
This function is used to set whether the onboard
LAN card is enabled.
This function decide whether to invoke the boot
ROM of the onboard LAN chip
This function decide whether to wakeup by PS2
keyboard.
This function decide whether to wakeup by PS2
Mouse.
This option is used to assign the I/O address and
interrupt request (IRQ) for onboard serial port 1
or 2
This feature allows to select the UART mode.
Options
Enabled
Disabled
Disabled
Auto
Combined
Enhanced
Non-Combined
Enabled : Enable USB 2.0
Controller
Disabled : Disable USB 2.0
Controller
Enabled : Enable USB Controller
Disabled : Disable USB Controller
Enabled : Enable USB Keyboard
Support
Disabled : Disable USB Keyboard
Support
Enabled : Enable USB Mouse
Support
Disabled : Disable USB Mouse
Support
Auto
DIsabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Auto : BIOS will automatically
setup the port 1 or 2 address
3F8/IRQ4 (Serial Port 1 default)
2F8/IRQ3 (Serial Port 2 default)
3E8/IRQ4
2E8/IRQ3
Diabled : Disable onboard Serial
port 1 or 2
Normal
IrDA
ASKIR
Chapter 2