Table of Contents
Advertisement
2.1
Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use your fingers to loosen the screw located at the bottom of the
base,and remove the base from the stand.And then remove the hinge
cover from monitor body by using your fingers.
3.
Use a screwdriver to remove the four screw on the arm and then
detach the arm/stand from the monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
1
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VP278 Series
2
2-1
Advertisement
Table of Contents
