Atag VA7016SRT Operating Instructions Manual page 5

Hide thumbs Also See for VA7016SRT:
Table of Contents

Advertisement

3. Top up with rinse aid
Drying is faster and a better result is achieved if you use rinse aid. You
will also achieve a better dishwashing result with clear and spotless
dishes.
Press to open
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3 Wipe up any splashes of rinse aid around the compartment.
4 Close the lid firmly.
Top up rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
After topping up, it may take a while before the symbol goes out.
NOTE!
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft water, the rinse aid can be
diluted 50:50 with water.
4. Top up with salt
Before you begin using a dishwasher with a water softener, you must
fill the salt compartment with salt for the water supply to be softened
automatically. Use large grain salt or special dishwasher salt.
WARNING!
In order to avoid rust stains a dishwashing programme must be
started immediately after adding salt.
Never pour dishwasher detergent into the salt compartment. This
destroys the water softener!
Do as follows the first time:
1 Unscrew the lid as illustrated.
2 Place the funnel supplied with the dishwasher in the salt
compartment top-up hole. First, pour in about 1 l of water.
3 Then add salt, a maximum of 1.0 kg, until the compartment is full.
4 Wipe up any excess salt so that the lid can be screwed on firmly.
5 Run a programme to ensure that any salt in the dishwasher is rinsed
away.
Top up salt
When the salt needs topping up, the above symbol lights on the display.
When the salt runs out, unscrew the cap and fill the container with salt.
Water is only needed the first time! Wipe clean and tighten. Run a
programme to ensure that any salt in the dishwasher is rinsed away.
After topping up, it may take a while before the symbol goes out.
Salt compartment lid
5

Advertisement

Table of Contents
loading

Table of Contents