Table of Contents
Advertisement
AUX (in) :
To listen from an external Audio Player such as a MP3 Player, Discman ...etc.
1. Connect one end of the supplied Audio Connection Cable to the AUX Out/Line Out/Phone Jack on
the external Audio Player.
2. Power on the unit as previously instructed then connect the other end of the cable to the AUX (In)
Jack on the top of unit as illustrated below. The unit will automatically switching to AUX (In) Mode
and the color of the Blue Indicator on the top of unit will turn to Green.
3. Power on and play the music on the connected Player as usual. (Make sure the volume level of the
connected Audio Player is turned to high level.)
4. During playback:
Press the
Button on the top of unit to mute, press again to turn th sound back
Press the
or
Press the
POWER /
press again to turn it on.
5. When finished listening, pressing and holding the
will turn off.
NOTE:
When the Audio Connection Cable was inserted into the AUX (in) Jack. BT will be auto cut.
Unplug the cable from the AUX (in) Jack before use BT.
SPECIFICATION :
Power source:---------------------------------- DC
Impedance of the speakers:--------------- 2 x 5 W; 4 ohm
Audio power:----------------------------------- 2 x 3 W (Total 6 W, RMS)
BT Version:------------------------------------- 2.1
BT Operation Distance:--------------------- 32 Feet in open area
Buttons repeatedly to adjust volume level as desired.
LED ON/OFF Button to turn off the Decorative LED Lights;
3.7V, 1200mAh (4.4WH) rechargeable Li-ion Battery
Recharge by DC
Button to shut off the unit. The Green Indicator
5V through DC IN Jack (Micro USB Port)
.
7
Advertisement
Table of Contents
